--- /dev/null
+##############################################################################
+#
+# @(#)sfs_cifs_rc $Revision: 1.14 $
+#
+# Specify SFS parameters for sfs runs in this file.
+#
+# The following parameters are configurable within the SFS run and
+# reporting rules.
+#
+# See below for details.
+#
+# Example shows a CIFS run of 100 to 1000 ops/sec
+#
+LOAD="50"
+INCR_LOAD=50
+NUM_RUNS=20
+PROCS=4
+CLIENTS="c09-44.sysnet.ucsd.edu"
+#MNT_POINTS="\\c09-40.sysnet.ucsd.edu\bluesky"
+MNT_POINTS="\\c09-45.sysnet.ucsd.edu\bluesky \\c09-45.sysnet.ucsd.edu\bluesky \\c09-45.sysnet.ucsd.edu\bluesky \\c09-45.sysnet.ucsd.edu\bluesky"
+#MNT_POINTS="\\niniel.sysnet.ucsd.edu\bluesky \\niniel.sysnet.ucsd.edu\bluesky \\niniel.sysnet.ucsd.edu\bluesky \\niniel.sysnet.ucsd.edu\bluesky"
+IPV6_ENABLE="off"
+FS_PROTOCOL="cifs"
+SFS_DIR="bin"
+SUFFIX=""
+WORK_DIR="result"
+PRIME_MON_SCRIPT=""
+PRIME_MON_ARGS=""
+USERNAME="spec"
+PASSWORD="password"
+DOMAIN="SPECDOMAIN"
+SFS_NFS_USER_ID=500
+SFS_NFS_GROUP_ID=500
+INIT_TIMEOUT=8000
+#
+# The following parameters are strictly defined within the SFS
+# run and reporting rules and may not be changed.
+#
+RUNTIME=300
+WARMUP_TIME=300
+ACCESS_PCNT=30
+APPEND_PCNT=70
+BLOCK_SIZE=
+DIR_COUNT=30
+FILE_COUNT=
+SYMLINK_COUNT=20
+TCP="on"
+#
+# The following parameters are useful for debugging or general system
+# tuning. They may not be used during during a reportable SFS run.
+#
+DEBUG=""
+DUMP=
+POPULATE=
+LAT_GRAPH=
+PRIME_SLEEP=0
+PRIME_TIMEOUT=0
+#
+# The default SFS options are implied if no values are assigned to
+# the variables. The variables and their meaning are as follows.
+#
+# The following parameters are configurable within the SFS run and
+# reporting rules.
+#
+# LOAD - array of numbers specifying the NFS loads
+# (NFS calls per second) to be generated by all clients
+# combined. The number of consecutive runs equals the size
+# of the array and the peak load equals the largest value
+# in the array. (DEFAULT = 60)
+# PROCS - number of SFS sub-processes to generate NFS
+# calls (DEFAULT PROCS = 4).
+# MNT_POINTS - string containing the shares of CIFS-mounted
+# filesystems on the client which will be used in the test or
+# it can be set to the name of a file containing a list of
+# shares. The file should be located in WORK_DIR. The
+# file should have the following format:
+# client1 \\svr\share ... \\svr\share
+# ...
+# clientN \\svr\share ... \\svr\share
+#
+# IPV6_ENABLE - If set ("on") then use IP V6 otherwise use IP V4.
+# (DEFAULT IPV6_ENABLE = "off").
+# FS_PROTOCOL - File server protocol used "cifs" or "nfs"
+# (DEFAULT FS_PROTOCOL = "nfs")
+# NUM_RUNS - number indicating the number of multi-client runs. NUM_RUNS
+# should only be used if the size of the LOAD array <= 1;
+# INCR_LOAD - number indicating the load increment factor in NFS call/sec.
+# The first run generates LOAD calls/sec,
+# subsequent runs are made with LOAD + (N * INCR_LOAD)
+# calls/sec; where initial N = 0. INCR_LOAD should
+# only be used if the size of the LOAD array <= 1.
+# CLIENTS - string containing client's host names; include the Prime-
+# Client's host name if you will be using the Prime-Client to
+# generate NFS loads.
+# SFS_DIR - string containing the directory path where the SFS
+# executables are stored; should be the same for all systems
+# This location is used first, if the binaries are not found
+# there then it looks in the "binaries" directory.
+# (DEFAULT SFS_DIR = "bin")
+# SUFFIX - Suffix for the log files.
+# WORK_DIR - string containing directory path where the SFS output
+# files are stored, this should be the same for all systems.
+# PRIME_MON_SCRIPT - string containing the name of a script used to
+# control the start and stop of any external SFS processes
+# like external performance monitors. The sample script
+# 'sfs_ext_mon' shows the expected semantics of the program.
+# This variable must refer to an executable on a Windows
+# client.
+# PRIME_MON_ARGS - string containing optional arguments that are passed
+# to the PRIME_MON_SCRIPT.
+#
+# USERNAME - The user name for mapping the share.
+# PASSEORD - The password for mapping the share.
+# DOMAIN - The domain for mapping the share
+# SFS_NFS_USER_ID - User ID for NFS server. Used only when running on
+# Windows client.
+# SFS_NFS_GROUP_ID - Group ID for NFS server. Used only when running on
+# Windows client.
+#
+# The following parameters are strictly defined within the SFS
+# run and reporting rules and may not be changed.
+#
+# RUNTIME - number of seconds to generate load
+# (DEFAULT RUNTIME = 300).
+# TCP - If set ("on") then use NFS/TCP behaviour rather than UDP.
+# WARMUP_TIME - number of seconds to warmup
+# (DEFAULT WARMUP_TIME = 300).
+# ACCESS_PCNT - percent of total file set available for use by i/o
+# operations that will be accessed.
+# (DEFAULT ACCESS_PCNT = 20).
+# APPEND_PCNT - percent of writes that append rather than overwrite
+# (DEFAULT APPEND_PCNT = 70).
+# BLOCK_SIZE - number of KB in a block, up to 4 Meg.
+# (Value is automatically negoitated with the server)
+# DIR_COUNT - number of files per directory to use for directory
+# operations (DEFAULT DIR_COUNT = 30).
+# FILE_COUNT - number of files to use for read and write
+# operations. By default, number of files is
+# calculated from the specified LOAD and ACCESS_PCNT.
+# SYMLINK_COUNT - number of symbolic links to use for symlink
+# operations (DEFAULT SYMLINK_COUNT = 20).
+#
+# The following parameters are useful for debugging or general system
+# tuning. They may not be used during during a reportable SFS run.
+#
+# DUMP - If set to a non-zero value, dump raw data points at end of
+# run. (DEFAULT DUMP = 0 ).
+# LAT_GRAPH - Debug option to enable latency graph logs. May invalidate
+# results due to overhead of logging. (default "", to
+# enable set to "on"
+# POPULATE - If set ("on") then only populate the file set but do not
+# run the test.
+# PRIME_SLEEP - number of seconds Prime-Client should sleep after starting
+# and stopping the SFS external monitoring facility and
+# before sending synchronization message to clients. This is a
+# provision to allow sufficient time for starting and stopping
+# other performance monitoring utilities that could be used
+# during SFS execution.
+# PRIME_TIMEOUT - number of seconds Prime-Client should wait for a
+# response from all the clients. Zero indicates the
+# default should be used.
+# INIT_TIMEOUT - number of seconds Prime-Client should wait for a
+# response from all the clients during the INIT phase.
+# May be changed if needed and will not invalidate the
+# run.
projects / bluesky.git / commitdiff